High quality 3D printers
INFINAM® RG photopolymers have been specially developed for 3D printing of rigid industrial parts using photo-curing technologies.
INFINAM® RG 2000 L is a photo-resin suited for a number of industries but shines most in the demanding eyewear industry. The clear liquid formulation cures quickly and is easy to process. The ready-to-use material combines excellent impact resistance with high temperature resistance while exhibiting long-lasting thermomechanical performance.
Tensile Strength (MPa) = 53
Elongation at break (%) = 48
Izod Notched Impact = 44
Heat deflection Temperature = 78
Flexural Strength (MPa) = 0.3
The low yellowing index - even after prolonged UV irradiation - also makes INFINAM® RG 2000 L suitable for applications such as microfluidic reactors or transparent high-end prototypes for observing the inner workings of complex assemblies. The excellent light transmission also enables other applications such as lenses, light guides and illumination covers.
- Greater than 98% optical trasmittance
- Low yellowness value
- Unseen combination of HDT 78°C & Izod Notcherd Impact of 44 J/m
- Very low water absorption
- Resistant against saline solutions
Tested on a variety of DLP printers
1.) 120 min @ 80 °C with UV-light 2.) 180 min @ 80 °C thermal oven
Fill up the form below and we will send you the material data sheet by e-mail.
Fill up the form below and we will send you the data sheet by e-mail.
Call us or send us an email and we will be happy to help you.