DEMI X 200 Plus

The PostProcess 403 chemistry is a new formulation that improves upon the performance of the previously released PLM-402-SUB (referred to as 402 from here on). The primary benefits of the solution are the same as those identified previously with the 402 detergent, including industry-leading cycle times and reduction of required process steps. Unlike previous methods which may have required both TPM and dirty IPA baths followed by various rinse steps, cycle times with 403 in PostProcess’s patented hardware technology are frequently less than 10 minutes. Additionally, the process takes place within just one piece of equipment. This effectively cuts down on both attended and unattended process time.

AUX-400-RINSE is an organic rinse solution designed to be an effective alternative to IPA for the final rinse step in the finishing of 3D printed parts. The rinse solution is specifically designed for resin workflows where IPA is typically used to clean away detergent residues in combination with a drying step immediately prior to part finishing.AUX-400-RINSE has a longer lifespan than IPA and rinses three times more parts per gallon (L) than IPA. With half the evaporation rate of IPA, you need to change the tank less often. AUX-400-RINSE also has no effect on the mechanical properties of a part.