3D printers
High quality 3D printers
Polyamide technical filament modified for 3D printing with additional glass fiber filler content.
Material properties
The glass fibers minimize shrinkage; warping behavior is thus largely reduced. The material exhibits enormous strengths with very low tendency to warp and very good layer adhesion. The good heat and media resistance makes it suitable for all applications for high-strength lightweight parts. Suitable for use in autoclave up to 180°C - non-conductive.Rough surface appearance with matt gloss. Very stiff filament that can break in the feed at tight bending radii. The material differs from F3 PA-GF Pro by its increased stiffness.
Processing information
The use of abrasion-resistant nozzles is strongly recommended. The filament must be stored and printed dry for the best printing results.